TeamAPEV_PPIHC_2015_E-Runner

Nobuhiro ‘Monster’ Tajima has just unveiled his entrant for the Pikes Peak International Hill Climb 2015 built in collaboration with Rimac Automobili. Officially dubbed the Tajima Rimac E-Runner Concept_One, the car has been created to supersede the electric hillclimber Tajima used in last year’s race to the clouds.

Powering the Tajima Rimac E-Runner Concept_One are four independent electric motors, one driving each wheel. Combined, the motors deliver in excess of 1475 hp and 1500 Nm of torque which is more than twice the power of Tajima’s 2014 entrant. This powertrain setup means no gearbox or differentials are required as the power from each motor is instead transferred to the ground through a chain drive system. Additionally, the E-Runner Concept_One features the same all wheel torque vectoring system as the Rimac Concept_One which has the ability to control the torque of each wheel 100 times a second.

[youtube]http://www.youtube.com/watch?v=0md_xJUwsTM[/youtube]

When it is all said and done, the hillclimber can accelerate to 100 km/h in a blistering 2.2 seconds as well as 200 km/h in 5.4 seconds. Elsewhere, the car features an advanced regenerative braking system and is based around an aluminium alloy tubular space frame and incorporates a full carbon fibre body. Despite the weight of the four electric motors, the Tajima Rimac E-Runner Concept_One tips the scales at an impressively minimal 1500 kg.

Discussing the car, Mate Rimac said “We are quite confident that Tajima Rimac E-Runner Concept_One will break previous year’s record (9:43.9 minutes). He is a great driver with tons of experience. Interesting fact – he raced Pikes Peak his first time a year before I was born. 28 years later, we work alongside to push the limits further. With the support of our best engineers and technicians, our technology, powertrain, battery-system and Torque Vectoring, he will be able to push the boundaries of electric race cars to a whole new level. Working with Mr. Tajima and his team is an amazing experience of which we enjoy every second.”

[showhide]
“Team APEV with MONSTER SPORT, led by the racing legend Nobuhiro “Monster” Tajima, teamed up with Rimac Automobili. As a result, 2015 Pikes Peak International Hill Climb Race will have a new 1.1 MW beast at the starting line, the Tajima Rimac E-Runner Concept_One.
Rimac Automobili are once again showing their vigorous racing DNA taking the challenge in one of the most prestigious races in the world. Mr. Tajima’s decades long experience in racing and Rimac Automobili’s state of the art technology and know-how brought to life a staggering creation, the Tajima Rimac E-Runner Concept_One. It is powered by four independent electric motors, giving the car a total power of over 1,1 MW (1,475 HP). That is more than twice the power Mr. Tajima had in his 2014 car when he broke his own Pikes Peak record, stopping the clock at 9:43,90.

There are no gearboxes or differentials on this car. The power of each independent motor is transferred to each wheel by an innovative chain drive system developed specifically for this project, which saves a lot of weight and space. Embracing the Rimac Automobili technology, the Tajima Rimac E-Runner Concept_One features an adapted racing version of the Rimac All Wheel Torque Vectoring system, first implemented in the Rimac Concept_One. The Rimac AWTV controls the torque of each motor 100 times a second. The system can vary the torque on each wheel depending on the steering angle, speed, longitudinal and lateral forces, yaw-rates and number of other variables. The ECU runs the collected sensor-data through complex mathematical algorithms which calculate the optimum torque distribution on a millisecond-level. This enables the vehicle to take full advantage of the tires, squeezing the maximum out of their potential and giving the driver the desired vehicle dynamics at any given moment. Mr Tajima will thus have both the 1,1 MW of power and maximum grip in each of the Pikes Peak’s 156 corners.

“We measured 0-100 km/h in 2,2 seconds. 200 km/h comes in 5,4 seconds from a standstill. Cornering forces and stopping numbers are also impressive, but let’s not spoil the surprise. We are quite confident that Tajima Rimac E-Runner Concept_One will break previous year’s record. He is a great driver with tons of experience. Interesting fact – he raced Pikes Peak his first time a year before I was born. 28 years later, we work alongside to push the limits further. With the support of our best engineers and technicians, our technology, powertrain, battery-system and Torque Vectoring, he will be able to push the boundaries of electric race cars to a whole new level. Working with Mr. Tajima and his team is an amazing experience of which we enjoy every second.” reveals Mr. Rimac.

The Pikes Peak hill climb is 19,9 km long and ends up at 4,301 m above sea level. Petrol engines have oxygen starvation problem at that altitude – the power of the engine decreases over 40 percent. However, electric motors don’t use oxygen, so Mr. Tajima will have the full power of all four electric motors available from start until the finish line.

Pikes Peak race
The Pikes Peak International Hill Climb race in Colorado has taken place since 1916. On average it features around 130 competitors from all over the world. This year the event is starting with practice sessions on Tuesday, June 23rd, culminating on race day, Sunday June 28th.
The track is 19,99 km (12,42 miles) long, has 156 turns climbing 1,440 m (4,720 ft) from the start at Mile7 of the Pikes Peak Highway, to the finish at 4,300 m (14,110 ft).

Tajima Rimac E-Runner Concept_One
Technical data:
All-wheel drive
Four independent Rimac permanent magnet electric motors
Rimac All Wheel Torque Vectoring
Maximum power: 1100 kW
Maximum torque: 1500 Nm
Maximum regenerative braking: 400 kW
57 kWh Rimac Automobili battery pack
Four chain driven single reduction Rimac transmission systems
Monster Sport aluminum alloy tubular space frame with carbon-fiber body
Electrically assisted power steering
Adjustable shock absorbers
Ventilated brake discs Ø370 mm front and rear + Rimac regenerative braking system
340/710 R18 slick tyres / 13” × 18” wheels
Kerb weight: 1500 kg
0-100 km/h 2,2 s
Top speed: 270 km/h”
[/showhide]

LEAVE A REPLY

Please enter your comment!
Please enter your name here